GridLock Hard Lid Ceilings

hardlid-ceiling-image

BSL-3 and BSL-4 facilities cannot use suspended ceilings but need something more durable than gyp board. GridLock™ fiberglass composite ceiling in a "Hard-Lid" ceiling, Systems installed in much the same manner as GridLock Walls; sealed to affect a complete air and water sealed envelope. The fiberglass composite ceiling does not need painting and is impervious to air and water. The chemical resistant get coat seal withstands repeated disinfecting and cleaning and meets Class A, ASTM E84 requirements for Flame Spread and Smoke Developed. All surfaces of the GridLock™ systems have been tested against the most aggressive disinfecting protocols in the industry. They have superior chemical resistance over virtually any coating and have been proven to be resistant to VHP, Chlorine Dioxide, Sodium hypochlorite, Quaternary ammonium chlorides, Potassium hydroxides, Xylene, betadine, phosphoric and nitric acid blends and Sulfuric acid. The systems are impervious to air and moisture and are guaranteed pinhole free.

GridLock™ systems are cement and wood free and exceed USDA, FDA, GMP, NIH, and CDC specifications for surface finishes.

There are three components within the structural architecture of the Hard-Lid ceiling systems, the panel face, the core, and the joint. Combining these in various ways provides the GridLock™ Shield system for your facility. The system chosen is based on application, mounting options and budgetary considerations.

  • Panel Face
  • Core
  • Joint

Panel Face

Exposed or visible face of the panel. Both offer superb performance

Ultra Smooth

Ultra Smooth, has high gloss

Standard

Standard Smooth Finish

Core

Structural Integrity of the panel. All have recycled content and are LEED eligible

Aluminum + HDPE

Repeated layers of aluminum and HDPE. Can replace drywall.

HDPE

Single layer of HDPE between fiberglass layers.

Re-May

Single layer of Re-may.

Aluminum and Foam

Layered aluminum with foam.

Resin Fabric

Resin saturated fabric.

Joint

Functional union between panels. Both withstand BSL3 and BSL4 pressure testing

Recessed Shiplap

Routed edge with recessed shiplap, mounting to stud with virtually seamless joint face.

Batten

Square edge secured with a batten cover.

Clean Room

Square edge panel mounted on substrate with 1/8 inch space and seamless joint face

Routered Edge

Routered edge panel on substrate with fastener in seam, with seamless joint face

Product Details for: GridLock Hard Lid Ceilings Please Note: All downloads are in PDF format, please use the contact form or call the office at 800-638-9874 to request downloads in Microsoft Word format. Ordering Information: If you would like to order any of the products on this page please call our sales team at 410-778-3625. Thank You.
Product Download Key
PDS: Product Data Sheet SPEC: Specification Sheet SUB: Submittal Pack (Includes Product Data and Safety Data Sheets)

System Options:
Designed to address virtually any condition from high containment to conventional facilities, cladding over hard board, dry wall and CMU or complete systems that mount directly to stud.

Product Description Face/Core/Joint
Bio/CR 1
12mm Ultra Smooth Face: Ultra Smooth - Core: Aluminum + HDPE - Joint: Routed Compound
Bio/CR 2
6mm Ultra Smooth Face: Ultra Smooth - Core: Aluminum + HDPE - Joint: Routed Compound
Bio/CR 3
12mm Standard Smooth Face: Standard Smooth - Core: Aluminum + HDPE - Joint: Routed Compound
Bio/CR 4
6mm Standard Smooth Face: Standard Smooth - Core: Aluminum + HDPE - Joint: Routed Compound
Bio/CR 1-B
12mm Ultra Smooth with Batten Face: Ultra Smooth - Core: Aluminum + HDPE - Joint: Battens
Bio/CR 2-B
6mm Ultra Smooth with Batten Face: Ultra Smooth - Core: Aluminum + HDPE - Joint: Battens
Bio/CR 3-B
12mm Standard Smooth with Batten Face: Standard Smooth - Core: Aluminum + HDPE - Joint: Battens
Bio/CR 4-B
6mm Standard Smooth with Batten Face: Standard Smooth - Core: Aluminum + HDPE - Joint: Battens
Bio/CR 6
3mm Ultra Smooth Face: Ultra Smooth - Core: Resin Fabric - Joint: Options
Bio/CR 7
3mm Standard Smooth Face: Standard Smooth - Core: Resin Fabric - Joint: Options
Bio/CR 8
3mm Color Low Gloss Matte Gypsum Mount Face: Smooth Matte – Core Embedded glass strand - Joint: Compound
Ultra Clean I
9mm Ultra Smooth / .120 Re-May Face: Ultra Smooth - Core: Re- May - Joint: Battens
Ultra Clean II
9mm Standard Smooth / .120 Re-May Face: Standard - Core: Re- May - Joint: Battens